whatis apple

Letar och luskar kommandon i terminalen och fastnade lite för "whatis"

Skrev "whatis apple"

och detta kom upp:

pdisk(8) - Apple partition table editor
(END)
´##########
Testade sedan även:
whatis apple computer

fick upp detta:
[admins-dator:~] admin% whatis apple computer
pdisk(8) - Apple partition table editor
login(1) - log into the computer
(END)
##############
Testade även:

"whatis hidden"

Fick då upp detta:

Tcl_IsSafe(3), Tcl_MakeSafe(3), Tcl_CreateSlave(3), Tcl_GetSlave(3), Tcl_GetMaster(3), Tcl_GetInterpPath(3), Tcl_CreateAlias(3)
, Tcl_CreateAliasObj(3), Tcl_GetAlias(3), Tcl_GetAliasObj(3), Tcl_ExposeCommand(3), Tcl_HideCommand(3) - manage multiple Tcl in
terpreters, aliases and hidden commands

##############
Skrev även:

"whatis a star"

och fick upp allt detta:

[admins-dator:~] admin% whatis a star

AutoSplit(3) - split a package for autoloading
BIO_new_bio_pair(3) - create a new BIO pair
BIO_new_bio_pair(3o) - create a new s-1BIOs0 pair
BIO_push(3), BIO_pop(3) - add and remove BIOs from a chain
BIO_push(3o), BIO_pop(3o) - add and remove BIOs from a chain
ConsoleMessage(8) - Send a message to SystemStarter
DSA_dup_DH(3) - create a DH structure out of DSA structure
DSA_dup_DH(3o) - create a s-1DHs0 structure out of s-1DSAs0 structure
Devel::DProf(3) - a Perl code profiler
Devel::Peek(3) - A data debugging tool for the s-1XSs0 programmer
Devel::SelfStubber(3) - generate stubs for a SelfLoading module
ERR_remove_state(3) - free a thread´s error queue
ERR_remove_state(3o) - free a thread´s error queue
ExtUtils::Manifest(3) - utilities to write and check a s-1MANIFESTs0 file
ExtUtils::Mkbootstrap(3) - make a bootstrap file for use by DynaLoader
File::Basename(3), fileparse(3) - split a pathname into pieces basename
File::CheckTree(3), validate(3) - run many filetest checks on a tree
File::Find(3), find(3) - traverse a file tree finddepth
IPC::Open2(3), s-1IPC:s0:Open2(3), open2(3) - open a process for both reading and writing
IPC::Open3(3), s-1IPC:s0:Open3(3), open3(3) - open a process for reading, writing, and error handlin
g
Net::Ping(3) - check a remote host for reachability
Pod::Usage(3), pod2usage()(3) - print a usage message from embedded pod documentation
SAMBA(7) - A Windows SMB/CIFS fileserver for UNIX
SSL_CTX_new(3) - create a new SSL_CTX object as framework for TLS/SSL enabled functions
SSL_CTX_new(3o) - create a new s-1SSL_CTXs0 object as framework for s-1TLS/SSLs0 enabled fu
nctions
SSL_CTX_set_client_CA_list(3), SSL_set_client_CA_list(3), SSL_CTX_add_client_CA(3), SSL_add_client_C
A(3) - set list of CAs sent to the client when requesting a client certificate
SSL_CTX_set_client_CA_list(3o), SSL_set_client_CA_list(3o), SSL_CTX_add_client_CA(3o), SSL_add_clien
t_CA(3o) - set list of CAs sent to the client when requesting a client certificate
SSL_CTX_set_ssl_version(3), SSL_set_ssl_method(3), SSL_get_ssl_method(3) - choose a new TLS/SSL meth
od
SSL_CTX_set_ssl_version(3o), SSL_set_ssl_method(3o), SSL_get_ssl_method(3o) - choose a new s-1TLS/SS
Ls0 method
SSL_accept(3) - wait for a TLS/SSL client to initiate a TLS/SSL handshake
SSL_accept(3o) - wait for a s-1TLS/SSLs0 client to initiate a s-1TLS/SSLs0 handshake
SSL_do_handshake(3o) - perform a s-1TLS/SSLs0 handshake
SSL_get_current_cipher(3), SSL_get_cipher(3), SSL_get_cipher_name(3), SSL_get_cipher_bits(3), SSL_ge
t_cipher_version(3) - get SSL_CIPHER of a connection
SSL_get_current_cipher(3o), SSL_get_cipher(3o), SSL_get_cipher_name(3o), SSL_get_cipher_bits(3o), SS
L_get_cipher_version(3o) - get s-1SSL_CIPHERs0 of a connection
SSL_get_version(3) - get the protocol version of a connection
SSL_get_version(3o) - get the protocol version of a connection
SSL_new(3) - create a new SSL structure for a connection
SSL_new(3o) - create a new s-1SSLs0 structure for a connection
SSL_read(3) - read bytes from a TLS/SSL connection
SSL_read(3o) - read bytes from a s-1TLS/SSLs0 connection
SSL_session_reused(3o) - query whether a reused session was negotiated during handshake
SSL_set_bio(3) - connect the SSL object with a BIO
SSL_set_bio(3o) - connect the s-1SSLs0 object with a s-1BIOs0
SSL_set_fd(3) - connect the SSL object with a file descriptor
SSL_set_fd(3o) - connect the s-1SSLs0 object with a file descriptor
SSL_set_session(3) - set a TLS/SSL session to be used during TLS/SSL connect
SSL_set_session(3o) - set a s-1TLS/SSLs0 session to be used during s-1TLS/SSLs0 connect
SSL_shutdown(3) - shut down a TLS/SSL connection
SSL_shutdown(3o) - shut down a s-1TLS/SSLs0 connection
SSL_write(3) - write bytes to a TLS/SSL connection
SSL_write(3o) - write bytes to a s-1TLS/SSLs0 connection
Tcl_Backslash(3) - parse a backslash sequence
Tcl_CommandComplete(3) - Check for unmatched braces in a Tcl command
Tcl_Concat(3) - concatenate a collection of strings
Tcl_CreateChannelHandler(3), Tcl_DeleteChannelHandler(3) - call a procedure when a channel becomes r
eadable or writable
Tcl_CreateMathFunc(3) - Define a new math function for expressions
Tcl_CreateTimerHandler(3), Tcl_DeleteTimerHandler(3) - call a procedure at a given time
Tcl_DoWhenIdle(3), Tcl_CancelIdleCall(3) - invoke a procedure when there are no pending events
Tcl_GetOpenFile(3) - Get a standard IO File * handle from a channel. (Unix only)
Tcl_NewByteArrayObj(3), Tcl_SetByteArrayObj(3), Tcl_GetByteArrayFromObj(3), Tcl_SetByteArrayLength(3
) - manipulate Tcl objects as a arrays of bytes
Tcl_Sleep(3) - delay execution for a given number of milliseconds
Tcl_StaticPackage(3) - make a statically linked package available via the load command
Tcl_StringMatch(3), Tcl_StringCaseMatch(3) - test whether a string matches a pattern
Tcl_TraceVar(3), Tcl_TraceVar2(3), Tcl_UntraceVar(3), Tcl_UntraceVar2(3), Tcl_VarTraceInfo(3), Tcl_V
arTraceInfo2(3) - monitor accesses to a variable
Test(3), 1 Test(3) - provides a simple framework for writing test scripts
Text::Abbrev(3), abbrev(3) - create an abbreviation table from a list
accept(2) - accept a connection on a socket
accept(8), accept/reject(8) - accept/reject jobs sent to a destination
access(2) - check access permissions of a file or pathname
appleping(1) - exercises the AppleTalk network by sending packets to a named host
apply(1) - apply a command to a set of arguments
at_cho_prn(8) - allows you to choose a default printer on the AppleTalk internet
atexit(3) - register a function to be called on exit
atprint(1) - transfer data to a printer using AppleTalk protocols
attrs(3) - set/get attributes of a subroutine (deprecated)
autouse(3) - postpone load of modules until a function is used
bashbug(1) - report a bug in bash
bind(2) - bind a name to a socket
bindresvport(3) - bind a socket to a privileged IP port
blib(3) - Use MakeMaker´s uninstalled version of a package
bpwhoami(1) - print the output of a bootparams whoami call
bsearch(3) - binary search of a sorted table
bzero(3) - write zeroes to a byte string
bzgrep(1), bzfgrep(1), bzegrep(1) - search possibly bzip2 compressed files for a regular expression
bzip2(1), bunzip2(1) - a block-sorting file compressor, v1.0.2 bzcat
cal(1) - displays a calendar
close(2) - delete a descriptor
colrm(1) - remove columns from a file
connect(2) - initiate a connection on a socket
creat(3) - create a new file
crl2pkcs7(1) - Create a PKCS#7 structure from a s-1CRLs0 and certificates
cscope(1) - interactively examine a C program
csh(1) - a shell (command interpreter) with C-like syntax
ctags(1) - create a tags file
curl(1) - get a URL with FTP, TELNET, LDAP, GOPHER, DICT, FILE, HTTP or HTTPS syntax
curl-config(1) - Get information about a libcurl installation
curs_addch(3), addch(3), waddch(3), mvaddch(3), mvwaddch(3), echochar(3), wechochar(3) - add a character (with attributes) to a curses wi
ndow, then advance the cursor
curs_addchstr(3), addchstr(3), addchnstr(3), waddchstr(3), waddchnstr(3), mvaddchstr(3), mvaddchnstr(3), mvwaddchstr(3), mvwaddchnstr(3)
- add a string of characters (and attributes) to a curses window
curs_addstr(3), addstr(3), addnstr(3), waddstr(3), waddnstr(3), mvaddstr(3), mvaddnstr(3), mvwaddstr(3), mvwaddnstr(3) - add a string of
characters to a curses window and advance cursor
curs_clear(3), erase(3), werase(3), clear(3), wclear(3), clrtobot(3), wclrtobot(3), clrtoeol(3), wclrtoeol(3) - clear all or part of a cu
rses window
curs_delch(3), delch(3), wdelch(3), mvdelch(3), mvwdelch(3) - delete character under the cursor in a curses window
curs_deleteln(3), deleteln(3), wdeleteln(3), insdelln(3), winsdelln(3), insertln(3), winsertln(3) - delete and insert lines in a curses w
indow
curs_inch(3), inch(3), winch(3), mvinch(3), mvwinch(3) - get a character and attributes from a curses window
curs_inchstr(3), inchstr(3), inchnstr(3), winchstr(3), winchnstr(3), mvinchstr(3), mvinchnstr(3), mvwinchstr(3), mvwinchnstr(3) - get a s
tring of characters (and attributes) from a curses window
curs_insch(3), insch(3), winsch(3), mvinsch(3), mvwinsch(3) - insert a character before cursor in a curses window
curs_insstr(3), insstr(3), insnstr(3), winsstr(3), winsnstr(3), mvinsstr(3), mvinsnstr(3), mvwinsstr(3), mvwinsnstr(3) - insert string be
fore cursor in a curses window
curs_instr(3), instr(3), innstr(3), winstr(3), winnstr(3), mvinstr(3), mvinnstr(3), mvwinstr(3), mvwinnstr(3) - get a string of character
s from a curses window
curs_resize(3), wresize(3) - resize a curses window
curs_scanw(3), scanw(3), wscanw(3), mvscanw(3), mvwscanw(3), vwscanw(3) - convert formatted input from a curses widow
curs_scr_dmp(3), scr_dump(3), scr_restore(3), scr_init(3), scr_set(3) - read (write) a curses screen from (to) a file
curs_scroll(3), scroll(3), srcl(3), wscrl(3) - scroll a curses window
cut(1) - select portions of each line of a file
cvsbug(8) - send problem report (PR) about CVS to a central support site
dd(1) - convert and copy a file
ditto(8) - copy files and directories to a destination directory
dyld_debug(3), dyld debug(3) - programmatic interface for debugging a task using the dynamic link editor
dylibprof(1) - control the shared pc sampling of a dynamic shared library
execl(3), execlp(3), execle(3), exect(3), execv(3), execvp(3) - execute a file
execve(2) - execute a file
fclose(3) - close a stream
fetchmail(1) - fetch mail from a POP, IMAP, ETRN, or ODMR-capable server
fflush(3), fpurge(3) - flush a stream
ffs(3) - find first bit set in a bit string
fgetln(3) - get a line from a stream
fgetpos(3), fseek(3), fseeko(3), fsetpos(3), ftell(3), ftello(3), rewind(3) - reposition a stream
fgets(3), gets(3) - get a line from a stream
find(1) - walk a file hierarchy
findsmb(1) - list info about machines that respond to SMB name queries on a subnet
fork(2) - create a new process
form_cursor(3) - position a form window cursor
form_field_userptr(3) - associate application data with a form field
form_userptr(3) - associate application data with a form item
fputc(3), putc(3), putchar(3), putw(3) - output a character or word to a stream
fputs(3), puts(3) - output a line to a stream
fsplit(1) - split a multi-routine Fortran file into individual files
fsync(2) - synchronize a file´s in-core state with that on disk
fts(3) - traverse a file hierarchy
funopen(3), fropen(3), fwopen(3) - open a stream
gendsa(1) - generate a s-1DSAs0 private key from a set of parameters
getdirentries(2) - get directory entries in a filesystem independent format
getpass(3) - get a password
glArrayElement(3) - render a vertex using the specified vertex array element
glBegin(3), glEnd(3) - delimit the vertices of a primitive or a group of like primitives
glBindTexture(3) - bind a named texture to a texturing target
glBitmap(3) - draw a bitmap
glCallList(3) - execute a display list
glCallLists(3) - execute a list of display lists
glClipPlane(3) - specify a plane against which all geometry is clipped
glColorMaterial(3) - cause a material color to track the current color
glColorSubTable(3) - respecify a portion of a color table
glColorTable(3) - define a color lookup table
glConvolutionFilter1D(3) - define a one-dimensional convolution filter
glConvolutionFilter2D(3) - define a two-dimensional convolution filter
glCopyColorSubTable(3) - respecify a portion of a color table
glCopyColorTable(3) - copy pixels into a color table
glCopyConvolutionFilter1D(3) - copy pixels into a one-dimensional convolution filter
glCopyConvolutionFilter2D(3) - copy pixels into a two-dimensional convolution filter
glCopyTexImage1D(3) - copy pixels into a 1D texture image
glCopyTexImage2D(3) - copy pixels into a 2D texture image
glCopyTexSubImage1D(3) - copy a one-dimensional texture subimage
glCopyTexSubImage2D(3) - copy a two-dimensional texture subimage
glCopyTexSubImage3D(3) - copy a three-dimensional texture subimage
glDeleteLists(3) - delete a contiguous group of display lists
glDrawPixels(3) - write a block of pixels to the frame buffer
glEvalMesh(3), glEvalMesh1(3), glEvalMesh2(3) - compute a one- or two-dimensional grid of points or lines
glEvalPoint(3), glEvalPoint1(3), glEvalPoint2(3) - generate and evaluate a single point in a mesh
glFrustum(3) - multiply the current matrix by a perspective matrix
glGenLists(3) - generate a contiguous set of empty display lists
glGet(3), glGetBooleanv(3), glGetDoublev(3), glGetFloatv(3), glGetIntegerv(3) - return the value or values of a selected parameter
glGetColorTable(3) - retrieve contents of a color lookup table
glGetString(3) - return a string describing the current GL connection
glGetTexImage(3) - return a texture image
glGetTexLevelParameter(3), glGetTexLevelParameterfv(3), glGetTexLevelParameteriv(3) - return texture parameter values for a specific leve
l of detail
glIsEnabled(3) - test whether a capability is enabled
glIsList(3) - determine if a name corresponds to a display-list
glIsTexture(3) - determine if a name corresponds to a texture
glLoadName(3) - load a name onto the name stack
glLogicOp(3) - specify a logical pixel operation for color index rendering
glMap1(3), glMap1d(3), glMap1f(3) - define a one-dimensional evaluator
glMap2(3), glMap2d(3), glMap2f(3) - define a two-dimensional evaluator
glMapGrid(3), glMapGrid1d(3), glMapGrid1f(3), glMapGrid2d(3), glMapGrid2f(3) - define a one- or two-dimensional mesh
glNewList(3), glEndList(3) - create or replace a display list
glPassThrough(3) - place a marker in the feedback buffer
glPolygonMode(3) - select a polygon rasterization mode
glReadBuffer(3) - select a color buffer source for pixels
glReadPixels(3) - read a block of pixels from the frame buffer
glRect(3), glRectd(3), glRectf(3), glRecti(3), glRects(3), glRectdv(3), glRectfv(3), glRectiv(3), glRectsv(3) - draw a rectangle
glRotate(3), glRotated(3), glRotatef(3) - multiply the current matrix by a rotation matrix
glScale(3), glScaled(3), glScalef(3) - multiply the current matrix by a general scaling matrix
glSelectBuffer(3) - establish a buffer for selection mode values
glSeparableFilter2D(3) - define a separable two-dimensional convolution filter
glTexImage1D(3) - specify a one-dimensional texture image
glTexImage2D(3) - specify a two-dimensional texture image
glTexImage3D(3) - specify a three-dimensional texture image
glTexSubImage1D(3) - specify a one-dimensional texture subimage
glTexSubImage2D(3) - specify a two-dimensional texture subimage
glTexSubImage3D(3) - specify a three-dimensional texture subimage
glTranslate(3), glTranslated(3), glTranslatef(3) - multiply the current matrix by a translation matrix
glVertex(3), glVertex2d(3), glVertex2f(3), glVertex2i(3), glVertex2s(3), glVertex3d(3), glVertex3f(3), glVertex3i(3), glVertex3s(3), glVe
rtex4d(3), glVertex4f(3), glVertex4i(3), glVertex4s(3), glVertex2dv(3), glVertex2fv(3), glVertex2iv(3), glVertex2sv(3), glVertex3dv(3), g
lVertex3fv(3), glVertex3iv(3), glVertex3sv(3), glVertex4dv(3), glVertex4fv(3), glVertex4iv(3), glVertex4sv(3) - specify a vertex
glob(3), globfree(3) - generate pathnames matching a pattern
gluBeginCurve(3), gluEndCurve(3) - delimit a NURBS curve definition
gluBeginPolygon(3), gluEndPolygon(3) - delimit a polygon description
gluBeginSurface(3), gluEndSurface(3) - delimit a NURBS surface definition
gluBeginTrim(3), gluEndTrim(3) - delimit a NURBS trimming loop definition
gluBuild1DMipmapLevels(3) - builds a subset of one-dimensional mipmap levels
gluBuild1DMipmaps(3) - builds a one-dimensional mipmap
gluBuild2DMipmapLevels(3) - builds a subset of two-dimensional mipmap levels
gluBuild2DMipmaps(3) - builds a two-dimensional mipmap
gluBuild3DMipmapLevels(3) - builds a subset of three-dimensional mipmap levels
gluBuild3DMipmaps(3) - builds a three-dimensional mipmap
gluCylinder(3) - draw a cylinder
gluDeleteNurbsRenderer(3) - destroy a NURBS object
gluDeleteQuadric(3) - destroy a quadrics object
gluDeleteTess(3) - destroy a tessellation object
gluDisk(3) - draw a disk
gluErrorString(3) - produce an error string from a GL or GLU error code
gluGetNurbsProperty(3) - get a NURBS property
gluGetString(3) - return a string describing the GLU version or GLU extensions
gluGetTessProperty(3) - get a tessellation object property
gluLookAt(3) - define a viewing transformation
gluNewNurbsRenderer(3) - create a NURBS object
gluNewQuadric(3) - create a quadrics object
gluNewTess(3) - create a tessellation object
gluNurbsCallback(3) - define a callback for a NURBS object
gluNurbsCallbackData(3) - set a user data pointer
gluNurbsCallbackDataEXT(3) - set a user data pointer
gluNurbsCurve(3) - define the shape of a NURBS curve
gluNurbsProperty(3) - set a NURBS property
gluNurbsSurface(3) - define the shape of a NURBS surface
gluOrtho2D(3) - define a 2D orthographic projection matrix
gluPartialDisk(3) - draw an arc of a disk
gluPerspective(3) - set up a perspective projection matrix
gluPickMatrix(3) - define a picking region
gluPwlCurve(3) - describe a piecewise linear NURBS trimming curve
gluQuadricCallback(3) - define a callback for a quadrics object
gluSphere(3) - draw a sphere
gluTessBeginContour(3), gluTessEndContour(3) - delimit a contour description
gluTessBeginPolygon(3) - delimit a polygon description
gluTessCallback(3) - define a callback for a tessellation object
gluTessEndPolygon(3) - delimit a polygon description
gluTessNormal(3) - specify a normal for a polygon
gluTessProperty(3) - set a tessellation object property
gluTessVertex(3) - specify a vertex on a polygon
glutAddMenuEntry(3) - adds a menu entry to the bottom of the current menu.
glutAddSubMenu(3) - adds a sub-menu trigger to the bottom of the current menu.
glutAttachMenu(3) - attaches a mouse button for the current window to the^M identifier of the current menu; glutDetachMenu
glutBitmapCharacter(3) - renders a bitmap character using OpenGL.
glutBitmapWidth(3) - returns the width of a bitmap character,^M glutBitmapLength returns the length of a bitmap font string.
glutChangeToMenuEntry(3) - changes the specified menu item in^M the current menu into a menu entry.
glutChangeToSubMenu(3) - changes the specified menu item in the current^M menu into a sub-menu trigger.
glutCopyColormap(3) - copies the logical colormap for the layer in use^M from a specified window to the current window.
glutCreateMenu(3) - creates a new pop-up menu.
glutCreateSubWindow(3) - creates a subwindow.
glutCreateWindow(3) - creates a top-level window.
glutExtensionSupported(3) - helps to easily determine whether a^M given OpenGL extension is supported.
glutGameModeString(3) - sets the game mode configuration via a string.
glutGetColor(3) - retrieves a red, green, or blue component for a given^M color index colormap entry for the layer in use´s logi
cal colormap for the^M current window.
glutInitDisplayString(3) - sets the initial display mode via a string.
glutPositionWindow(3) - requests a change to the position of the current window.
glutReshapeWindow(3) - requests a change to the size of the current window.
glutSetColor(3) - sets the color of a colormap entry in the layer of use^M for the current window.
glutSolidCone(3), glutWireCone(3) - render a solid or wireframe cone respectively.
glutSolidCube(3), glutWireCube(3) - render a solid or wireframe cube respectively.
glutSolidDodecahedron(3), glutWireDodecahedron(3) - render a^M solid or wireframe dodecahedron (12-sided regular solid) respectively.
glutSolidIcosahedron(3), glutWireIcosahedron(3) - render a^M solid or wireframe icosahedron (20-sided regular solid) respectively.
glutSolidOctahedron(3), glutWireOctahedron(3) - render a solid^M or wireframe octahedron (8-sided regular solid) respectively.
glutSolidSphere(3), glutWireSphere(3) - render a solid or wireframe sphere respectively.
glutSolidTeapot(3), glutWireTeapot(3) - render a solid or wireframe teapot respectively.
glutSolidTetrahedron(3), glutWireTetrahedron(3) - render a^M solid or wireframe tetrahedron (4-sided regular solid) respectively.
glutSolidTorus(3), glutWireTorus(3) - render a solid or wireframe^M torus (doughnut) respectively.
glutStrokeCharacter(3) - renders a stroke character using OpenGL.
glutStrokeWidth(3) - returns the width of a stroke character,^M glutStrokeLength returns the length of a stroke font string.
glutTimerFunc(3) - registers a timer callback to be triggered in a^M specified number of milliseconds.
grep(1), egrep(1), fgrep(1) - print lines matching a pattern
groff(7) - a short reference for the GNU roff language
head(1) - display first lines of a file
infotocap(1m) - convert a terminfo description into a termcap description
insque(3), remque(3) - insert/remove element from a queue
isinf(3) - isnan test for infinity or not-a-number
kextload(8) - loads, validates, and generates symbols for a kernel extension (kext)
kextunload(8) - terminates objects and unloads code associated with a kernel extension
kgmon(8) - generate a dump of the operating system´s profile buffers
kill(1) - terminate or signal a process
kill(2) - send signal to a process
killpg(3) - send signal to a process group
kvm_nlist(3) - retrieve symbol table names from a kernel image
labs(3) - return the absolute value of a long integer
leaks(1) - Search a process´s memory for unreferenced malloc buffers
link(2) - make a hard file link
listen(2) - listen for connections on a socket
lock(1) - reserve a terminal
look(1) - display lines beginning with a given string
lpmove(8) - move a job to a new destination
mail.local(8) - store mail in a mailbox
make_smbcodepage(1) - construct a codepage file for Samba
make_unicodemap(1) - construct a unicode map file for Samba
makewhatis(8) - create a whatis.db database
md5(1) - calculate a message-digest fingerprint (checksum) for a file
memset(3) - write a byte to byte string
menu_cursor(3) - position a menu´s cursor
menu_pattern(3) - get and set a menu´s pattern buffer
menu_userptr(3) - associate application data with a menu item
mkbom(8) - create a bill-of-materials file
mkdir(2) - make a directory file
mkfifo(2) - make a fifo file
mkfile(8) - create a file
mknod(2) - make a special file node
mkslapdconf(8) - generate a configuration file for the LDAP server
mod_perl(3) - Embed a Perl interpreter in the Apache s-1HTTPs0 server
mount(2), unmount(2) - mount or dismount a filesystem
mount_smbfs(8) - mounts a shared resource from an SMB file server
mount_udf(8) - mount a UDF filesystem
mount_webdav(8) - mount a WebDAV filesystem
msgrcv(2) - receive a message from a message queue
msgsnd(2) - send a message to a message queue
msync(2) - synchronize a mapped region
mtree(8) - map a directory hierarchy
munmap(2) - remove a mapping
newfs(8), mount_mfs(8) - construct a new file system
newfs_hfs(8) - construct a new HFS Plus file system
newfs_msdos(8) - construct a new MS-DOS (FAT) file system
nice(1) - execute a utility with an altered scheduling priority
nifind(1) - find a directory in the NetInfo hierarchy
nigrep(1) - search for a regular expression in the NetInfo hierarchy
nohup(1) - invoke a command immune to hangups
nologin(8) - politely refuse a login
nseq(1) - create or examine a netscape certificate sequence
open(2) - open or create a file for reading or writing
patch(1) - apply a diff file to an original
perltie(1) - how to hide an object class in a simple variable
pfbtops(1) - translate a PostScript font in .pfb format to ASCII
qabs(3) - return the absolute value of a quad integer
quot(8) - display total block usage per user for a file system
raise(3) - send a signal to the current process
rcmd(3), rresvport(3), iruserok(3), ruserok(3) - routines for returning a stream to a remote command
readlink(2) - read value of a symbolic link
recv(2), recvfrom(2), recvmsg(2) - receive a message from a socket
rename(2) - change the name of a file
repquota(8) - summarize quotas for a file system
rev(1) - reverse lines of a file
rexec(3) - return stream to a remote command
rmdir(2) - remove a directory file
roff(7) - a survey of the roff typesetting system
rs(1) - reshape a data array
sample(1) - Profile a process during a time interval
scandir(3), alphasort(3) - scan a directory
sem_close(2) - close a named semaphore
sem_open(2) - initialize and open a named semaphore
sem_post(2) - unlock a semaphore
sem_unlink(2) - remove a named semaphore
sem_wait(2), sem_trywait(2) - lock a semaphore
send(2), sendto(2), sendmsg(2) - send a message from a socket
shar(1) - create a shell archive of files
shlock(1) - create or verify a lock file for shell scripts
shm_open(2) - open a shared memory object
shutdown(2) - shut down part of a full-duplex connection
shutdown(8) - close down the system at a given time
slapadd(8) - Add entries to a SLAPD database
sliplogin(8) - attach a serial line network interface
smbpasswd(8) - change a user´s SMB password
socketpair(2) - create a pair of connected sockets
split(1) - split a file into pieces
strcspn(3) - span the complement of a string
strdup(3) - save a copy of a string
strings(1) - find the printable strings in a object, or other binary, file
strmode(3) - convert inode status information into a symbolic string
strspn(3) - span a string
strstr(3) - locate a substring in a string
strtol(3), strtoq(3) - convert string value to a long or quad_t integer
strtoul(3), strtouq(3) - convert a string to an unsigned long or uquad_t integer
strxfrm(3) - transform a string under locale
stty(1) - set the options for a terminal device interface
sudo(8) - execute a command as another user
symlink(2) - make symbolic link to a file
system(3) - pass a command to the shell
tail(1) - display the last part of a file
tcpdump(1) - dump traffic on a network
texi2html(1) - a Texinfo to HTML converter
tf_util(3), tf_init(3), tf_get_pname(3), tf_get_pinst(3), tf_get_cred(3), tf_close(3) - Routines for manipulating a Kerberos ticket file
tput(1), reset(1) - initialize a terminal or query terminfo database
truncate(2), ftruncate(2) - truncate a file to a specified length
tsort(1) - topological sort of a directed graph
uniq(1) - report or filter out repeated lines in a file
unvis(1) - revert a visual representation of data back to original form
unvis(3), strunvis(3) - decode a visual representation of characters
uuencode(1), uudecode(1) - encode/decode a binary file
uuidgen(1) - command-line utility to generate a new UUID value
vfork(2) - spawn new process in a virtual memory efficient way
vis(1) - display non-printable characters in a visual format
vmmap(1) - Display the virtual memory regions allocated in a process
wall(1) - write a message to users
what(1) - show what versions of object modules were used to construct a file
which(1) - locate a program file including aliases and paths Xr csh 1 only)
write(1) - send a message to another user
ypbind(8) - create and maintain a binding to a YP server
ypcat(1) - print the values of all keys in a YP database
yppoll(8) - get version of a YP map from YP server
ypxfr(8) - get a YP map from YP server
zforce(1) - force a ´.gz´ extension on all gzip files
zgrep(1) - search possibly compressed files for a regular expression
star: nothing appropriate

###########

Det sista kommandot radar vad jag förstår upp alla möjliga kommandon eller?

[ 08 Oktober 2002, 01:37: Meddelandet ändrat av: iWay ]